Yamaha 2007 FZ6-NA Service Manual page 15

Odometer and tripmeter modes (FZ6-NHG(W)/
FZ6-NAHG/FZ6-SHG(W)/FZ6-SAHG)
1. Odometer/tripmeter/fuel reserve tripmeter
Push the "SELECT" button to switch the dis-
play between the odometer mode "ODO" and
the tripmeter modes "TRIP A" and "TRIP B" in
the following order:
"TRIP A" → "TRIP B" → "ODO" → "TRIP A"
When the fuel amount in the fuel tank
decreases to 3.4 L (0.90 US gal) (0.75
Imp.gal), the left segment of the fuel meter will
start flashing, and the odometer display will
automatically change to the fuel reserve trip-
meter mode "F TRIP" and start counting the
distance traveled from that point. In that case,
push the "SELECT" button to switch the dis-
play between the various tripmeter and odom-
eter modes in the following order:
"F-TRIP" → "TRIP A" → "TRIP B" → "ODO" →
"F-TRIP"
To reset a tripmeter, select it by pushing the
"SELECT" button, and then push the "RESET"
button for at least one second. If you do not
reset the fuel reserve tripmeter manually, it will
reset itself automatically and the display will
return to the prior mode after refueling and
traveling 5 km (3 mi).
Fuel meter
A. FZ6-N/FZ6-NA/FZ6-S/FZ6-SA
B. FZ6-NHG(W)/FZ6-NAHG/FZ6-SHG(W)/
FZ6-SAHG
1. Fuel meter
The fuel meter indicates the amount of fuel in
the fuel tank. The display segments of the fuel
meter disappear towards "E" (Empty) as the
fuel level decreases. When only one segment
is left near "E", refuel as soon as possible.
NOTE:
This fuel meter is equipped with a self-diagno-
sis system. If the electrical circuit is defective,
the following cycle will be repeated until the
malfunction is corrected: "E" (Empty), "F" (Full)
and symbol " " will flash eight times, then go
off for approximately 3 seconds. If this occurs,
have a Yamaha dealer check the electrical cir-
cuit.
1-6
FEATURES