Yamaha 2007 FZ6-NA Service Manual page 461

Malfunc-
tion code
Front wheel sensor signal is not
received properly.
11*
Rear wheel sensor signal is not
received properly.
12
Incorrect signal is detected by the
front (13) or rear (14) wheel sen-
sor.
13 (front)
14 (rear)
No continuity in the front or rear
wheel sensor circuits
15 (front)
16 (rear)
Missing serration of sensor rotor
18
Disconnection and short-circuit of
hydraulic unit solenoid
21
Starter motor monitor malfunction
22
Stop light failure
(Brake system circuit has failure.)
24
ABS (ANTI-LOCK BRAKE SYSTEM)
Problem Check point
• Installation of the front wheel
sensor
• Front wheel sensor lead and cou-
pler
• ABS wire harness circuit
• Front wheel sensor rotor
• Installation of the rear wheel sen-
sor
• Rear wheel sensor lead and cou-
pler
• ABS wire harness circuit
• Rear wheel sensor rotor
• Wheel sensor installation
• Wheel sensor housings
• Wheel sensor rotors
• Continuity of sensor circuits
• ABS wire harness circuit
• Connection of sensor coupler
• Sensor rotor
• Wire harness circuit
• Hydraulic unit solenoid coupler
• Hydraulic unit solenoid
• Battery terminal is disconnect
• Wire harness circuit
• Replace the ABS ECU.
• Adjust the brake light switch.
• Brake light switch
• Bulb has burned out.
• Check the wire harness for the
brake light system circuit.
8-88
Reference
Malfunction
code 11
Malfunction
code 12
Malfunction
codes 13
(front wheel)
and 14 (rear
wheel)
Malfunction
codes 15
(front wheel
sensor) and
16 (rear
wheel sen-
sor)
Malfunction
code 18
Malfunction
code 21
Malfunction
code 22
Malfunction
code 24