Yamaha 2007 FZ6-NA Service Manual page 95

FZ6-N/FZ6-NA
1. Left handlebar switch lead
2. Main switch and immobilizer lead
3. Clutch cable
4. Throttle cables
5. Right handlebar switch lead
6. Handlebar
7. Headlight stay
A. Clamp the right handlebar switch lead and
handlebars. Point the tip of the clamp
downward in front of the handlebar.
B. 5 mm (0.20 in) or less
C. To the meter
D. Route the branched lead behind the main
switch and immobilizer lead.
E. Pass the leads through the hole of the
frame from the vehicle down side in order
of the main switch lead, immobilizer lead,
left handlebar switch lead and clutch cable.
F. To the headlight and meter
G. Pass the right handlebar switch lead and
throttle cable, clutch cable through the
meter cover hole.
H. Install the clamp in the direction as shown
in the illustration.
I. Route the main switch lead and immobi-
lizer lead, left handlebar switch lead clutch
cable by the inside of the headlight stay.
2-50
CABLE ROUTING