Yamaha 2007 FZ6-NA Service Manual page 185

2. Check:
• Front wheel sensor rotor "2"
Cracks/damage → Replace the front wheel
assembly.
NOTE:
The wheel sensor rotor of the vehicle is
inserted under pressure by a special process
and cannot be replaced as a single unit. To
replace the sensor rotor, replace the wheel
assembly.
Installing the front wheel sensor
1. Install:
• Front wheel
NOTE:
Align the slot in the sensor housing with the
projection of the front fork before assembly.
ECA14470
CAUTION:
Make sure there are no foreign materials in
the wheel hub. Foreign materials cause
damage to the inner sensor rotor and wheel
sensor.
2. Install:
• Front wheel sensor "1"
Front wheel sensor bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
• Front wheel sensor lead holder "2"
• Brake caliper "3"
Front brake caliper bolt
40 Nm (4.0 m·kg, 29 ft·lb)
• Brake hose holder "4"
NOTE:
When installing the front wheel sensor, check
the wheel sensor lead for twists and the sensor
electrode for foreign materials.
ECA14480
CAUTION:
To route the front wheel sensor lead, refer
to "CABLE ROUTING" on page 2-47.
4-12
FRONT WHEEL