Yamaha 2007 FZ6-NA Service Manual page 395

3. Check the entire signaling sys-
tem's wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
OK↓
This circuit is OK.
The tail/brake light fails to come on.
1. Check the tail/brake light bulb and
socket.
Refer to "CHECKING THE BULBS
AND BULB SOCKETS" on page
8-112.
OK↓
2. Check the front brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-109.
OK↓
3. Check the rear brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-109.
OK↓
4. Check the entire signaling sys-
tem's wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
OK↓
This circuit is OK.
The turn signal light, turn signal indicator light or both fail to blink.
1. Check the turn signal indicator
light bulb and socket.
Refer to "CHECKING THE LEDS"
on page 8-113.
OK↓
2. Check the turn signal switch.
Refer to "CHECKING THE
SWITCHES" on page 8-109.
OK↓
SIGNALING SYSTEM
NG→
Properly connect or repair the signal-
ing system's wiring.
NG→
Replace the tail/brake light bulb,
socket or both.
NG→
Replace the front brake light switch.
NG→
Replace the rear brake light switch.
NG→
Properly connect or repair the signal-
ing system's wiring.
NG→
Replace the turn signal indicator light
bulb, socket or both.
NG→
Replace the left handlebar switch.
8-22