Yamaha 2007 FZ6-NA Service Manual page 168

EAS21750
ELECTRICAL SYSTEM
EAS21790
REPLACING THE HEADLIGHT BULBS
The following procedure applies to both of the
headlight bulbs.
1. Disconnect:
• Headlight coupler "1"
2. Remove:
• Headlight bulb cover "2"
A. FZ6-S/FZ6-SHG(W)/FZ6-SA/FZ6-SAHG
B. FZ6-N/FZ6-NHG(W)/FZ6-NA/FZ6-NAHG
3. Remove:
• Headlight bulb holder "1"
4. Remove:
• Headlight bulb "2"
ELECTRICAL SYSTEM
A. FZ6-S/FZ6-SHG(W)/FZ6-SA/FZ6-SAHG
B. FZ6-N/FZ6-NHG(W)/FZ6-NA/FZ6-NAHG
EWA13320
WARNING
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb until it has
cooled down.
5. Install:
• Headlight bulb
Secure the new headlight bulb with the
headlight bulb holder.
ECA13690
CAUTION:
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be
adversely affected. If the headlight bulb
gets soiled, thoroughly clean it with a cloth
moistened with alcohol or lacquer thinner.
6. Install:
• Headlight bulb holder
7. Install:
• Headlight bulb cover
8. Connect:
• Headlight coupler
EAS21810
ADJUSTING THE HEADLIGHT BEAMS
The following procedure applies to both of the
headlights.
1. Adjust:
• Headlight beam (vertically)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Turn the adjusting screw "1" in direction "a"
or "b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
3-35
New