Adjusting The Engine Idling Speed - Yamaha 2007 FZ6-NA Service Manual

2. Simultaneously press and hold the
"SELECT" and "RESET" buttons, turn the
main switch to "ON", and continue to press
the buttons for 8 seconds or more.
NOTE:
"dI" appears on the clock LCD.
3. Press the "SELECT" button to select the
CO adjustment mode "Co" "1" or the diag-
nostic mode "dI".
4. After selecting "Co", simultaneously press
the "SELECT" and "RESET" buttons for 2
seconds or more to execute the selection.
NOTE:
The selected cylinder number appears on the
clock LCD.
• To decrease the selected cylinder number,
press the "RESET" button.
• To increase the selected cylinder number,
press the "SELECT" button.
5. After selecting the cylinder, simultaneously
press the "SELECT" and "RESET" buttons
for 2 seconds or more to execute the selec-
tion.
6. Change the CO adjustment volume by
pressing the "SELECT" and "RESET" but-
tons.
NOTE:
The CO adjustment volume appears on the
tripmeter LCD.
• To decrease the CO adjustment volume,
press the "RESET" button.
• To increase the CO adjustment volume,
press the "SELECT" button.
7. Release the switch to execute the selec-
tion.
8. Simultaneously press the "SELECT" and
"RESET" buttons to return to the cylinder
selection (step 5).
9. Turn the main switch to "OFF" to cancel the
mode.
EAS20610

ADJUSTING THE ENGINE IDLING SPEED

NOTE:
Prior to adjusting the engine idling speed, the
throttle bodies synchronization should be
adjusted properly, the air filter element should
be clean, and the engine should have ade-
quate compression.
1. Start the engine and let it warm up for sev-
eral minutes.
2. Check:
• Engine idling speed
Out of specification → Adjust.
Engine idling speed
1250–1350 r/min
3. Adjust:
• Engine idling speed
3-9
ENGINE