Lexmark X543 Service Manual page 51

User status and attendance messages (continued)
User primary message Explanation
Load <source> Printer does not detect media meeting the description <custom type> in <source>,
<custom type> where <source> is Tray 1 or Tray 2, Tray 3.
Load <source> Printer does not detect media meeting the size requested in the source indicated.
<size>
Load <source> Printer does not detect media meeting the size or type requested in the source
<type> <size> indicated.
Load single sheet Printer does not detect media meeting the description <custom type> in the single
<custom type> sheet feeder (manual feeder).
The following actions can be taken:
Load single sheet Printer does not detect media meeting the description <custom string> in the single
<custom string> sheet feeder (manual feeder).
The following actions can be taken:
Load single sheet Printer does not detect media meeting the description <size> in the single sheet
<size> feeder (manual feeder).
The following actions can be taken:
Load single sheet Printer does not detect media meeting the description <type> and <size> in the single
<type> <size> sheet feeder (manual feeder).
The following actions can be taken:
PJL ST Message Try one or more of the following:
Power Saver The printer is saving power while it waits for the next print job.
Programming Code The printer is receiving a file that is a code update. Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer off while this message appears
on the display.
Programming Flash Fonts and macros are being written to flash. Wait for the message to clear.
Ready The printer is ready to print.
• Load the input source with the correct type and size media.
• Cancel the current job.
• Load the input source with the correct type and size media.
• Cancel the current job.
• Load the input source with the correct type and size media.
• Cancel the current job.
• Load paper, and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
• Load paper and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
• Load paper and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
• Load paper and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
• press Select ( ) to clear the message, and continue printing.
• Wait for the message to clear.
• Send a job to print.
• Press Select ( ) to warm the printer to normal operating temperature.
Afterwards, Ready appears.
7525-xxx
Diagnostic information
2-7
Previous
Next
Go Back