Lexmark X543 Service Manual page 58

7525-xxx
Paper jam messages (2xx) (continued)
Error code
250.xx Paper Jam
Check Manual
Feeder
250.xx Paper Jam
<x> Pages Jammed
271.22 Paper Jam
Check <area>
or
271.22 Paper Jam
<x> Pages Jammed
290.02 Scanner ADF
Feed Jam
290.10 Scanner
Static Jam
290.20 Scanner
Static Jam-Paper
Present
290.30-Scanner
Static Jam-Paper
Stop
291.00 Scanner Jam,
remove all originals
from the scanner
291.01 Scanner Jam,
remove all originals
from the scanner
292 Scanner jam,
remove all originals
from the scanner
293 Replace all
originals if restarting
job
293.02 Flatbed cover
open
294.04 Scanner jam,
remove all originals
from the scanner
294.05 Scanner jam,
remove all originals
from the scanner
Service Manual
2-14
Description
A single page of media is jammed in
the multipurpose feeder.
Multiple pages of media are jammed in
the multipurpose feeder.
Output bin 1 declared jam.
The scanner ADF has failed to feed a
page to the ADF interval sensor.
Scanner ADF detects paper at the first
scanner sensor while the ADF is in an
idle state.
This message occurs when paper is
detected in the ADF during a POR, or
when the MFP is starting up.
This message displays when paper is
inserted past the paper stop on the
ADF.
Scanner ADF detects paper at the
second scanner sensor while the ADF
is in an idle state.
This message is posted if a jam is
detected at the first scanner sensor.
This message appears if the ADF
cover is open while paper is fed
through the ADF.
No paper sensed in the ADF.
The MFP senses that the flatbed cover
is open.
Jam at the ADF exit sensor.
A jam is detected at the ADF exit
sensor.
Action
Open tray 2 to access the jam area.
Remove the jammed page. See
paper jam" on page 3-43.
Open tray 2 to access the jam area.
Remove all the jammed pages. See
paper jam" on page 3-43.
Remove the sheet of paper rom the ADF.
Retry the job. If the error recurs, Go to
"ADF paper jam service check" on
page 2-71.
Remove all paper from the ADF. Retry the
job. If the error recurs, Go to
jam service check" on page
Remove original documents from the ADF.
Remove original documents from the ADF.
Remove the paper from the ADF, and
close the ADF cover. If the error recurs, Go
to
"ADF cover open service check" on
page 2-70.
Ensure that the paper present actuator is
in the correct position. See
"ADF paper
jam service check" on page
Close the flatbed cover. See
open service check" on page
Remove all paper from the ADF. If the
error recurs,
"ADF paper jam service
check" on page 2-71.
Previous
"250
Next
"250
Go Back
"ADF paper
2-71.
2-71.
"ADF cover
2-70.