6. FINISHER/HOLE PUNCHING UNIT MISFEED
When a paper misfeed occurs in the optional
finisher or hole punching unit, the MISFEED
symbol flashes and this message appears:
Misfeed in finisher
Press INFO
Remove the misfed paper as described below.
1
Raise the paper guide and remove the
misfed paper.
2
Lift the release lever and move the finisher
away from the copier.
3
Remove the paper misfed between the
finisher and the copier.
. Perform step 4 to 5 when the optional hole
punching unit is installed.
Paper guide
SYMBOL
149