Removing Jammed Staples (Optional) - Toshiba e-studio 55 Operator's Manual For Copying Functions

9. REMOVING JAMMED STAPLES (OPTIONAL)

When staples have jammed in the stapler unit of the optional finisher, the following message
appears:
Examine stapler
Finisher
1
Open the front cover of the finisher.
2
Close the front cover of the finisher, and
about 10 seconds later, open it again.
. The stapler unit will move to the specified
position.
. Do not remove the stapler unit without
performing the above procedure, or it will be
broken.
3
Turn the blue lever 90 degrees to the left
to unlatch the stapler unit and pull out the
stapler unit.
4
Pull up the stapler unit.
159