Actual-Size Copying By Specifying The Copy Size - Toshiba e-studio 55 Operator's Manual For Copying Functions

4. ACTUAL-SIZE COPYING BY SPECIFYING THE COPY SIZE

When copying irregular-size originals such as newspapers and magazines, or originals unable
to be detected in the automatic paper selection (APS) mode, do so by specifying the desired
copy size. For copying those originals in the enlargement or reduction mode, see "REDUCTION
AND ENLARGEMENT COPYING" on page 29.
1
Press the ZOOM ORG.→COPY key.
2
Select the copy size.
. Press the cassette of the desired copy paper
size chosen from those listed in the Copy
column.
. Or select the desired cassette on the Basic
panel.
3
Place the original(s) on the original feed
tray or on the glass.
When Using the Automatic Document Feeder
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The number of originals you can load at a
time is shown below.
A4, A4-R, B5, B5-R, A5-R : 60
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
A3 : 30
B4 : 35
Slides
27