Hole Punching Mode - Toshiba e-studio 55 Operator's Manual For Copying Functions

6. HOLE PUNCHING MODE

With the optional punching unit attached to the optional finisher (MJ-1015, MJ-1016), you can
have your copies punched with holes for binding.
• The thickness of paper should be in the range of 64~157 g/m
film is excluded.
When Using the Automatic Document Feeder
1
Place the originals.
. Place the originals face up on the original feed
tray.
2 Select the puncher mode.
. Press the BASIC key to display the Basic
menu. Then press the NON-SORT NON-
STAPLE key.
. Press the HOLE PUNCH key.
. If the key for the desired funcion is not shown,
press the Next key to switch the screen.
3
Key in the copy quantity using the digital
keys.
. When group-copying from the original
feed tray, you cannot vary the number of
copies for each original.
122
2
. Special paper such as OHP