Toshiba e-studio 55 Operator's Manual For Copying Functions page 60

4
Press the SET key.
. The set margin default is 7 mm.
. To change the margin:
Press the 0mm or 30mm
the desired margin setting, and press the SET
key.
. When combining image shifting with duplex
copying, select FRONT for the front side and
BACK for the back side of the copy.
5
Place the originals on the original feed tray
or on the glass.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. Place the original on the glass face down with
the bottom toward you and the left side
centred against the original scale.
6
Select the desired copy size, exposure,
reproduction ratio and copy quantity.
7
Press the START key.
Tip: Margins can be created also in the bypass
copy mode. To do this, set the paper in
the sheet bypass (see page 50), and press
the desired COPY-SIZE key to select the
paper size. If A4-R paper is used, press
the corresponding COPY-SIZE key twice.
key to select
57