Toshiba e-studio 55 Operator's Manual For Copying Functions page 34

Selecting the Original Size and the Copy Size
1
Press the ZOOM ORG.→COPY key.
2
Press the ORIGINAL SIZE key of the same
size as the original to be copied.
3
Press the desired COPY-SIZE key.
. The copier calculates the correct reproduction
ratio based on the selected original size and
copy size, and displays the reproduction ratio
on the reproduction-ratio display.
. If the desired size of paper is not in any of
the installed cassettes, the following message
appears:
Set correct cassette
Install the correct-sized cassette or use the
sheet bypass.
4
Place the original(s) on the original feed
tray or on the glass.
When Using the Automatic Document Feeder
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The number of originals you can load at a
time is shown below.
A4, A4-R, B5, B5-R, A5-R : 60
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
.
A3 : 30
B4 : 35
Slides
31