E-Studio55/65/80 Specifications - Toshiba e-studio 55 Operator's Manual For Copying Functions

1. e-STUDIO55/65/80 SPECIFICATIONS

Model Name
Type
Original Glass
Copying System
Developing System
Fixing System
Photosensor Type
Original Scanning System
Resolution
Acceptable Originals
Acceptable Copy Paper Size
Reversing Automatic
Document Feeder
Warm-up Time
Copying Speed
First Copy Time
Multiple Copying
Reproduction Ratio
Paper Supply
Toner Density Adjustment
Exposure Control
Light Source
Power Requirements
Power Consumption
Dimensions
Weight
Storage Capacity
* Specifications and appearance are subject to change without notice in the interest of product
improvement.
172
DP-5500/6500/8000
Console type
Fixed (originals referenced to left center)
Indirect electrophotographic method
2-component magnetic brush developing
Heat roller
OPC
Linear CCD sensor (7500 pixels)
600 dpi x 2400 dpi with smoothing
Sheets, books and three-dimensional objects
Automatic feeding : A3 to A5-R
Manual feeding : A3 to A5-R
Up to 60 originals (A4, 80 g/m
Feeding speed: 55 originals/minute (A4) for the e-STUDIO55
65 originals/minute (A4) for the e-STUDIO65/80
Acceptable originals:
Original size : A3 ~ A5-R
Paper weight : 60 ~ 90 g/m
About 7 minutes
e-STUDIO55: 55 copies per minute (A4)
e-STUDIO65: 65 copies per minute (A4)
e-STUDIO80: 80 copies per minute (A4)
(when fed from the Large-capacity feeder)
About 3.6 seconds (A4)
Up to 999 copies (digital key entry)
Actual size : 100±0.5%
Original size : A3, A4, A5, B4, FOLIO
Paper size : A3, A4, A5, B4, FOLIO
25 to 400% (in 1% increments)
* Independent scaling possible in the adjustment mode.
Cassette : 500 sheets (55 mm or less)
Sheet bypass : 100 sheets (11 mm or less)
Large-capacity feeder: 4,000 sheets
Magnetic auto-toner system
Automatic plus manual selection from 11 exposure steps
Halogen lamp
230 - 240 V, 50/60 Hz, 9A
2.0 kW max.
920 mm (W) x 742 mm (D) x 1111 mm (H)
Approx. 250 kg
Max. 480 sheets (A4) (Toshiba's own chart)
2
) can be set at a time.
2