Toshiba e-studio 55 Operator's Manual For Copying Functions page 54

3
Select the desired, image shift mode, edge
erase mode, dual-page copying, sort
copying, annotation, page number,
document storage or duplex copying mode
as well as the exposure and the
reproduction ratio.
4
Key in the desired copy quantity.
5
Place the original(s) on the original feed
tray or on the glass.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centred against the original scale.
6
Press the START key.
Note: Remove copies made on special sheets
such as thick paper 81~130 g/m
films or sticker labels one by one. They
should not be allowed to stack up in the
exit tray or finisher (optional).
2 , OHP
Slides
51