Paper Misfeed On The Bypass Feed Unit; Paper Misfeed In The Automatic Duplexer - Toshiba e-STUDIO3511 Operator's Manual

5.CLEAR PAPER SYMBOL (Cont.)

4. Paper Misfeed on the Bypass Feed Unit

1 Pull out misfed paper on the bypass tray.

5. Paper Misfeed in the Automatic Duplexer

1 Make sure that the bypass tray is opened,
and then open the automatic duplexer.
- Be careful not to let your fingers be caught between the
equipment and the automatic duplexer.
This could injure you.
- Do not touch the metal portion of a guide board as it could burn
you.
Lift the paper guide as indicated by the
2
arrow and remove any misfed paper.
Lower the paper guide and return the
3
automatic duplexer to the original
position.
- Be sure to close both sides of the Automatic Duplexer firmly.
12
258
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL