Toshiba e-studio 55 Operator's Manual For Copying Functions page 161

8. REPLACING STAPLES (OPTIONAL) (Cont.)
5
Reinstall the saddle stapler and saddle
stitcher to their previous position.
6
Check that the finisher is attached to the
copier and A3, B4 or A4-R sized paper is
set.
. If one of these sizes of paper is not set, test
stapling cannot be carried out.
7 Close the lower cover of the finisher.
Test stapling is automatically carried out.
. A blank copy is made automatically.
Note: Repeat steps 1 to 7 if test stapling is not
satisfactorily performed and "Set staple
cartridge" is still displayed.
158