When Placing the Original on the Glass
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centred against the original scale.
. The sensor unit immediately detects the size
of the original, and selects the appropriate
paper size.
. Close the automatic document feeder slowly
after the original size has been detected.
. Sometimes the following message appears:
Change direction of original
change the direction of the original on the
glass.
If the following message appears:
Set correct cassette
install the correct-sized cassette.
3
Select the exposure.
. The AUTO-EXPOSURE mode is set as the
default mode, and provides the optimum
exposure automatically according to the
darkness of the original.
. If you want to select the desired exposure,
see page 46.
4
Key in the desired copy quantity.
. You can key in up to 999.
. There is no need for this when making only
one copy.
. When an incorrect quantity is set, press the
CLEAR key and key in the correct number.
,
,
1
2
4
5
7
8
0
FC
3
6
9
C
25