Hole Punching - Toshiba e-studio 353 User Manual

Hole Punching

When the optional hole punch unit is attached to the finisher (Optional: MJ-1024, MJ-1023),
you can hole punch your copies. The paper weight should be in the range of 17 lb. Bond to
110 lb. Index. Special paper such as OHP files or labels is excluded.
1. When using this mode in bypass, be sure to specify the paper size.
2. Place the original(s).
3. Press the FINISHER button on the basic menu as
shown in the illustration on the right (highlighted).
4. Press the HOLE PUNCH button. Select other
copy modes as required.
5. Press the START button.
TIP: Available paper sizes for the hole punch: Since the number of punch holes and the
distance between the holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service technician.)
Page 14