Toshiba e-studio 55 Operator's Manual For Copying Functions page 33

5. REDUCTION AND ENLARGEMENT COPYING (Cont.)
When Placing the Original on the Glass
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centred against the original scale.
. Close the automatic document feeder slowly.
. The sensor unit immediately detects the size
of the original, selects the paper size matched
to the original, and calculates the reproduction
ratio based on the detected original size and
the selected copy size. The reproduction ratio
is then displayed.
. If the following message appears:
Change direction of original
change the direction of the original on the
glass.
. If the following message appears:
Use reduction cassette
install the correct-sized cassette, and set the
original on the glass again.
5
Select the desired exposure and copy
quantity.
6
Press the START key.
. Reduced or enlarged copies of the selected
size will be made.
Note: The copier may not be able to detect the
following types of originals in the AMS
mode:
. Transparent originals such as OHP film
. Originals with black areas
30
,
,
1
4
7
0
FC
2 3
5 6
8 9
C