Names Of The Main Components - Toshiba e-studio 55 Operator's Manual For Copying Functions

1. NAMES OF THE MAIN COMPONENTS

There are 2 types of optional finishers (MJ-1015 and
MJ-1016).
Functions available differ depending on the type of
the finisher installed.
• Press the key on the basic screen on the right
(shaded), and confirm the finishing modes on the
panel.
* The touch panel used in this chapter appears
when the optional finisher (MJ-1016, with the hole
punching unit) is installed in your copier.
108
Trays
Saddle Stitching Tray (MJ-1016 only)
Upper Cover
Hole Punching Unit
(optional)
Front Cover
Lower Cover