Toshiba e-studio 55 Operator's Manual For Copying Functions page 5

PREFACE (Cont.)
Features of the e-STUDIO55/65/80
The e-STUDIO55/65/80 is a plain paper digital copier.
The e-STUDIO55/65/80 scans originals and stores the resulting data in its memory as digital
images. The e-STUDIO55/65/80 allows you not only to process and edit these digital image
data, but also enables copies to be sorted and grouped quietly, quickly and easily. The e-
STUDIO55/65/80 incorporates a large-size display with a touch panel and menu buttons that
graphically represent copier functions. As a result, anybody can make clear-looking copies
quickly and easily.
The e-STUDIO55/65/80 also has the following convenient features which allow the digital
copier to be used in many applications.
.
Copying speed is 55 copies (A4) per minute for the e-STUDIO55, 65 copies (A4) per minute
for the e-STUDIO65, and 80 copies (A4) per minute for the e-STUDIO80.
.
The automatic original density function automatically reads the density of the original to
set the ideal copy density.
.
The size of the original is automatically read and the appropriate paper size and reproduction
ratio are automatically selected.
.
Wide reproduction range (25% to 400%).
.
Duplex copies or single-sided copies can be made automatically from two-sided originals.
Duplex copies can also be made automatically from single-sided originals.
.
Comes with the following digital editing functions:
Trimming, masking, negative/positive reversal, X-Y zoom and mirror image, etc.
.
Comes with the following memory editing functions:
2 in 1, 4 in 1, document storage, annotation and page numbering.
.
With the electronic sort function, you can also sort at high speed without damaging the
originals.
.
The cover-sheet mode allows you to add cover pages at the first and/or last pages of the
copies. The sheet-insertion mode allows you to insert copied and/or blank sheets at user-
specified pages.
.
Copy sizes from A5 up to A3 are acceptable.
.
Adding the optional finisher permits the stapling and sorting of copies as well as magazine
sorting (MJ-1016: with the saddle stitching function, MJ-1015: without the function). An
optional hole punching unit can be installed.
.
Comes with a weekly timer. This timer allows automatic turning ON or OFF of the power
supply at the specified startup or shutdown times, respectively.
.
An automatic job start mode. This mode allows you to start copying when warming-up is
completed after you have set the desired copy modes and pressed the START key.
Installing an optional printer unit allows you to print out data from PCs.
2