Toshiba e-studio 55 Operator's Manual For Copying Functions page 38

2
Press the 1→2 key to select the function
of single-sided originals to duplexed copies.
Note: If sheets of paper are left in the automatic
duplexer, the STACK
and this message is shown:
Remove paper from duplexer
Pull out the automatic duplexer slowly and
remove the sheets from the inside (see page
141~144).
If this message appears:
To exit paper in duplexer:
Press INFO
press INFO and the sheets of paper will
automatically exit.
3
Select the desired copy size, exposure,
reproduction ratio and copy quantity.
4
Place the originals.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The number of originals you can load at a
time is shown below.
A4, A4-R, B5, B5-R, A5-R : 60
symbol flashes
,
A3 : 30
B4 : 35
Slides
35