Toshiba e-studio 55 Operator's Manual For Copying Functions page 20

Auto Job Start Mode
If you set the desired copying modes and press the START key during warm-up, the copier
automatically starts copying when it becomes READY. Follow the procedure below to set up
the Auto Job Start mode.
1
Place the original(s) on the original feed
tray or on the glass.
When Using the Automatic Document Feeder
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The number of the originals you can set up
at a time is shown below.
A4, A4-R, B5, B5-R, A5-R : 60
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
When Placing the Original on the Glass
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centred against the original scale.
2
Set the desired copy modes.
. The automatic paper selection (APS) mode,
automatic exposure mode and copying of
one original are the default settings.
A3 : 30
B4 : 35
Slides
Automatic
document
feeder
Original
Original
scale
17