Toshiba e-studio 55 Operator's Manual For Copying Functions page 68

3 Specify the area of the original.
. Key in the value X1 using the digital keys and
press the upper SET key. If you key in a
wrong value, press the RESET key.
. Values X2, Y1 and Y2 require the same
procedure as X1.
4
Press the lower SET key.
5
Select the desired copy size, exposure,
reproduction ratio and copy quantity.
6
Place the original on the glass face down
with the bottom toward you and the left
side centred against the original scale.
7
Press the START key.
. Trimmed or masked copies exit from the
copier.
65