Table of Contents
Advertisement
10.2.1 How to Configure the ISDN Dial-In Connection
Via the Web Interface
E-DOC-CTC-20051017-0167 v1.0
Proceed as follows to configure the ISDN dial-in connection via the Web interface:
1
Go to Expert mode
2
Click Connections
3
Click Routed PPoI
Result: on the page that appears, you see a predefined connection called ISDN
backup.
4
Click the arrow to open the configuration pages for this connection.
Result:
the Parameters page appears:
5
Fill in the user name and password for the connection, as well as the dial-in
number. Also select the link type. Click Apply.
6
Click Routing.
Result:
the Routing page appears:.
7
If necessary, fill in the destination and a label. Click Apply.
8
Click Other.
Result:
the Other page appears:
Chapter 10
Routed PPPoI
85
Advertisement
Table of Contents
