The Speedtouch™ Interfaces - THOMSON SpeedTouch Configuration Manual

(wireless) business dsl routers
Hide thumbs Also See for SpeedTouch:
Table of Contents

Advertisement

Chapter 1
Introduction
Types of interfaces
6
1.2 The SpeedTouch™ Interfaces
In the SpeedTouch™ release R5.4 and higher, there are five different types of
interfaces:
Physical interfaces:
Interfaces that can be connected to other peripherals from outside the box:
Physical Ethernet interface
USB interface (USB 1.1 slave)
IEEE 802.11b/g WiFi Access Point
ISDN modem interface
DSL interface
ATM interfaces:
Interfaces that are created on top of an ATM address, or in case of an ATM
bundle, on top of another ATM interface.
Ethernet interfaces:
Interfaces that are created on top of a physical interface, bridge, ATM
interface, or in case of VLAN, on top of another Ethernet interface.
IP interfaces:
Interfaces that are created on top of an Ethernet interface, an ATM interface or
exist on top of a PPP interface.
PPP interfaces:
Interfaces that are created on top of:
an Ethernet interface
an ATM interface
the ISDN interface
the PPPoE Relay
E-DOC-CTC-20051017-0167 v1.0

Advertisement

Table of Contents
loading

Table of Contents