E-DOC-CTC-20051017-0167 v1.0
7
Specify a name for the connection.
Click Next.
8
Provide the IP address of the SpeedTouch™.
By default this will be 192.168.1.254.
Click Next.
9
Subsequent screens will guide you through the wizard. Follow the instructions
and enter the required information where needed.
This information should be provided by your Service Provider.
10
At the end of the configuration the following window appears:
Do one of the following:
Click Back to make changes to the configuration.
Click Finish to create the connection and close the wizard.
Click Cancel to exit the wizard.
Chapter 8
PPTP-to-PPPoA relaying
73