THOMSON SpeedTouch Configuration Manual page 76

Chapter 7
Routed PPPoA
Expected results
68
To check whether you have configured your connection correctly, take a look at the
interface list. Normally you should be able to follow the path you created.
=>interface list
Name Type
ethif1 physical
ethif2 physical
ethif3 physical
ethif4 physical
RELAY eth
bridge eth
OBC bridge
ethport1 bridge
ethport2 bridge
ethport3 bridge
ethport4 bridge
lan1 ip
RtPPPoA_atm atm
RtPPPoA_ppp ppp
RtPPPoA ip
The items in Italic are the interfaces created in this chapter.
The interface list does not include the ATM phonebook entry. To check its state, go
to the ATM phonebook list.
=>atm phonebook list
Name Use Address
RtPPPoA_ph 1 8.35
State Use UL Interfaces
connected 1 ethport1
connected 1 ethport2
connected 1 ethport3
connected 1 ethport4
connected 0
connected 1 lan1
connected 1 bridge
connected 1 bridge
connected 1 bridge
connected 1 bridge
connected 1 bridge
connected 0
connected 1 RtPPPoA_atm
connected 1 RtPPPoA
connected 0
E-DOC-CTC-20051017-0167 v1.0