Add/Edit A Vlan Group - ZyXEL Communications XMG3512-B10A User Manual

Table 71 Network Setting > Vlan Group (continued)
LABEL
Group Name
VLAN ID
Interfaces
Modify

13.2.1 Add/Edit a VLAN Group

Click the Add New VLAN Group button in the Vlan Group screen to open the following screen. Use this
screen to create a new VLAN group.
Figure 97 Add/Edit VLAN Group
The following table describes the fields in this screen.
Table 72 Add/Edit VLAN Group
LABEL
VLAN Group
Name
VLAN ID
LAN
OK
Cancel
Chapter 13 VLAN Group
DESCRIPTION
This shows the descriptive name of the VLAN group.
This shows the unique ID number that identifies the VLAN group.
This shows the LAN ports included in the VLAN group and if traffic leaving the port will be tagged
with the VLAN ID.
Click the Edit icon to change an existing VLAN group setting or click the Delete icon to remove
the VLAN group.
DESCRIPTION
Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
Enter a unique ID number, from 1 to 4,094, to identify this VLAN group. Outgoing traffic is tagged
with this ID if Tx Tagging is selected below.
Select Include to add the associated LAN interface to this VLAN group.
Select Tx Tagging to tag outgoing traffic from the associated LAN port with the VLAN ID number
entered above.
Click OK to save your changes back to the XMG.
Click Cancel to exit this screen without saving.
XMG3512-B10A User's Guide
171