Epson SC-S70600 series User Manual page 124

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Replacement procedure
A
Remove media, and press the P button to turn
the printer off.
"Replacing and removing media" on
U
page 64
B
Open the left maintenance cover and front cover.
C
Remove the target media holding plate.
Remove the sliding media holding plate in the
steps shown below.
(1) While holding the tabs of the media holding
plate on both sides, move the plate to the left
edge of the platen.
c
Important:
Be sure to remove the media holding plate
from the left edge of the platen. If the plate is
removed from the right edge, it will drop into
the printer and cause malfunction.
(2) Remove the left media holding plate, and then
remove the right one.
Maintenance
D
Insert a new media holding plate into the left edge
of the platen.
c
Important:
If the media holding plate is inserted into the
right edge, it will drop into the printer and
cause malfunction.
When inserting the plate, check the following
two points.
(1) Align the white line on the platen with that of
the media holding plate.
124