Epson SC-S70600 series User Manual page 40

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
c
Important:
If the roll holder is inserted into the roll core
insufficiently, media is not fed correctly
during printing because of slippage between
the roll holder and roll core.
This may cause banding in the print results.
J
Tighten the roll holder screw until the screw no
longer turns to fix the roll holder in place.
c
Important:
If the roll holder screw is loose, the roll holder
may move during printing. This could cause
stripes and unevenness in the print results.
Basic Operations
K
Rotate the handle until part A in the illustration
below is fully inserted.
c
L
Raise the media loading lever.
40
Important:
Once part A is hidden, do not turn the handle
any further. Failure to observe this precaution
could damage the roll holder.
If part A is still visible even after the handle
has been turned fully, rewind the handle.
Loosen the roll holder screw on the right side,
and then restart from Step 9.