Epson SC-S70600 series User Manual page 62

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Insertable media holding plates
Position the media holding plates, while the
media is placed over them, in such a way that each
edge of the media is aligned to the middle of a row
of the round holes in the media holding plates.
(1) Align the white lines of the media holding
plates with the white lines of the platen.
(2) To keep the plates from lifting, push them
down until you hear a clicking sound.
Basic Operations
c
S
Close the front cover.
When using the auto take-up reel unit, see:
"Using the Auto Take-up Reel Unit" on page 67
U
When not using the auto take-up reel unit, proceed to
the media check and setting change steps.
"Viewing and Changing Media Settings" on
U
page 63
62
Important:
❏ Do not use the media holding plates with
media that is 0.4 mm or thicker. The
media holding plates could touch and
damage the print head.
❏ Always position the plates so that the
edges of the media are at the centers of the
round holes. Incorrect positioning causes
banding (horizontal banding, tint
unevenness, or stripes) during printing.
❏ Move the media holding plates to the left
and right edges of the platen when they
are not in use.
❏ Do not use the media holding plates if the
sides of the printed media are smudged or
torn.