Epson SC-S70600 series User Manual page 29

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
❏ To cancel auto ink circulation, press the W
button while Circulating ink... is being
displayed on the control panel screen.
However, it cannot be canceled while ink
circulation is required. If auto ink
circulation is canceled to make prints using
spot color inks, tint unevenness may occur in
printing results.
To avoid cancellation of the auto ink
circulation process, we recommend that you
perform Ink Circulation before starting
printing.
"The Maintenance Menu" on
U
page 151
❏ Spot color ink cartridges must be removed and
thoroughly shaken once every 24 hours.
Shaking ink cartridges U
page 118
❏ Spot color ink cartridges must be stored flat (i.e.,
laid on their sides). If the cartridges are stored
vertically, even shaking the cartridges before use
may fail to dissolve the materials that have
sedimented in the ink during storage.
❏ When tint unevenness is detected in printing
results, perform Ink Refresh from the menu on the
control panel.
"Ink Refresh" on page 132
U
❏ Note the following when using ink layering.
❏ Use media at least 2% longer than specified
in document size settings.
❏ Note that the auto take-up reel unit may not
function as expected, causing a decline in
print quality.
❏ Some media do not support ink layering. For
details, refer to the documentation supplied
with the media or contact the manufacturer.
Introduction
"Shaking" on
29