EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
G
Fully insert the right roll holder.
H
To ensure the roll holder is inserted into the roll
core sufficiently, push the center section on the
side of the roll holder towards the roll end twice.
c
Important:
If the roll holder is inserted into the roll core
insufficiently, media is not fed correctly
during printing because of slippage between
the roll holder and roll core.
This may cause banding in the print results.
Basic Operations
I
Tighten the roll holder screw until the screw no
longer turns to fix the roll holder in place.
c
J
Remove the lifter.
59
Important:
If the roll holder screw is loose, the roll holder
may move during printing. This could cause
stripes and unevenness in the print results.