EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
B
Hold the cleaning stick flat and wipe the edges of
all the caps.
C
Hold the cleaning stick in a perpendicular
orientation, and wipe the outer areas of all the
caps.
If ink adheres as a film to the guide section in
front of and behind the caps, and lint adheres to
the inside of the cap, see the next section.
If nothing adheres to the caps, proceed to the
following section.
"Cleaning the wiper cleaner (daily)" on
U
page 109
Maintenance
Cleaning Around the Caps (When
Dirty)
Perform the following procedures depending on the
condition of the printer. When you have finished,
proceed to the cleaning process of the wiper cleaner.
"Cleaning the wiper cleaner (daily)" on page 109
U
When ink adheres to the guide section
A
Dampen the cleaning stick with ink cleaner.
"Using Ink Cleaner" on page 103
U
B
Apply ink cleaner to the guide section, and then
wipe it down.
108