Epson SC-S70600 series User Manual page 152

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Item
Nozzle Check
Print At Right
Print At Center
Print At Left
Cleaning
All Nozzles
*2
Head1/Head2
*2
Head1
*2
Head2
Selected Nozzles
Head Maintenance
Waste Ink Counter
*1
Ink Circulation
Ink Refresh
Head Washing
Using the Control Panel Menu
Parameter Explanation
Print A nozzle pattern will be printed. Inspect the pattern visually and perform
head cleaning if you detect faint or missing colors.
"Printing nozzle check patterns" on page 128
U
The options available vary with the option selected for Media Size Check
and the width of the media used.
Execute (Light)/ The options displayed vary with the model of printer used.
Execute (Medium)/
Note the numbers of patterns that contain faint or missing colors and
Execute (Heavy)
clean all or selected nozzles with problems. Selecting All Nozzles cleans
all nozzles (SC-S70600 series and SC-S30600 series) or all nozzles in a
selected print head (SC-S50600 series). Choose Selected Nozzles to clean
only the nozzles in selected arrays.
The level of cleaning can be selected from Execute (Light), Execute
Execute (Light)/
(Medium), and Execute (Heavy). Select Execute (Light) first. If the
Execute (Medium)/
problem persists after you have used Execute (Light), choose Execute
Execute (Heavy)
(Medium). If the problem persists after you have used Execute (Medium),
choose Execute (Heavy).
"Head Cleaning" on page 129
U
Move Head Position the print head for maintenance. Perform such maintenance as
cleaning the wiper, caps, and the area around print head only after using
this option to position the head for cleaning. Moving the print head
manually could cause malfunction.
"Cleaning" on page 103
U
- If you replace the waste ink bottle before being prompted by a message
indicating the replacement interval of the waste ink bottle in the control
panel, run the Waste Ink Counter option after replacement.
Circulate a spot color ink to prevent sedimentation in the print head or
tube. This function is available when avoiding an operation interrupt by
the auto ink circulation function of the printer.
All Nozzles, All This function is available when tint unevenness (areas of uneven density)
*4 are detected in printing results.
(except MS/WH) ,
*1
All (except WH) ,
The displayed menu varies depending on your model or the specified
*4 *1
MS/WH , WH
color mode.
"Ink Refresh" on page 132
U
*3, *4
Use this function if nozzle clogs cannot be cleared even after performing
XX/XX , Head1
head cleaning several times or cleaning around the print head.
*2
XX/XX , Head2
*2
XX/XX , Head1 All
The displayed menu varies depending on your model or the specified
*2
color mode. For details, see:
Nozzles , Head2
*2
All Nozzles , All
"Head Washing" on page 130
U
Nozzles
("XX" indicates an
ink color code.)
152