Epson SC-S70600 series User Manual page 140

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Item
Heating & Drying
Heater Temperature
Drying Time Per Pass
After Heater Feed
Additional Dryer
Advanced Settings
Media Tension
Media Suction
Head Movement
Tension Measurement
Multi-Strike Printing
Feed Speed
Roll Type
Restore Settings
Print Media List
Printer Setup
For more information on these items, see U
Setting items and setting values marked with asterisks indicate the following printer models.
*1: SC-S70600 series and SC-S50600 series only supported *2: SC-S50600 series only supported *3: SC-S30600 series
only supported *4: SC-S70600 series only supported
Item
Side Margin(Right)
Side Margin(Left)
Print Start Position
Media Size Check
Media End Check
Media Skew Check
*2
Head Strike Warning
Warning Options
Warning Level Options
Using the Control Panel Menu
Parameter
Pre-heater/platen heater: 30˚C to 50˚C (86˚F to 122˚F)
After heater: 30˚C to 55˚C (86˚F to 131˚F)
0 to 10 sec
Mode 1, Mode 2, Off
On, Off
0 to 40
0 to 10
Data Width, Printer Full Width
Periodically, Every Page, Off
Off, 2 to 8
Auto, Lv1, Lv2
Printable Side Out, Printable Side In
Yes, No
Print
"The Printer Setup Menu" on page
Parameter
3 to 25 mm (0.12 to 1.00 inch)
3 to 25 mm (0.12 to 1.00 inch)
0 to 800 mm (0.00 to 32.00 inch)
On, Off
On, Off
On, Off
On, Off
1 to 5
140
149.