Epson SC-S70600 series User Manual page 96

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
*3 Note the following points when setting margins.
❏
Leave margins of 10 mm or more when using media holding plates. Narrower margins could result in printer printing over
the plates.
❏
If the total of the print data width and set left and right margins exceeds the printable area, a portion of the data will not be
printed.
Note:
If the following points are not observed when Media Size Check is Off, printing may occur outside the left and right edges of
the media. Ink used outside the edges of the media will stain the inside of the printer.
❏ Ensure that the print data width does not exceed the loaded media width.
❏ When media is loaded to the left of the right side reference position, align the Print Start Position setting with the
position where the media set.
"The Printer Setup Menu" on page 149
U
Basic Operations
96