Epson SC-S70600 series User Manual page 44

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
When using the auto take-up reel unit, see:
"Using the Auto Take-up Reel Unit" on page 67
U
When not using the auto take-up reel unit, proceed to
the media check and setting change steps.
"Viewing and Changing Media Settings" on
U
page 63
Using the Optional Heavy Roll Media
Feeding Unit
This section uses the SC-S70600 series to illustrate how
to load media when the optional heavy roll media
feeding unit is installed.
!
Caution:
Because the media is heavy, it should not be carried
by one person. The use of a lifter is recommended
when handling media that weigh 40 kg or more.
The explanation that follows assumes that a lifter is
used.
The following types of lifter can be used.
❏ Fork or platform thickness: 28 mm or less
❏ Fork or platform can be lowered to approx. 190 mm
from the floor.
Before loading media, be sure to read the following:
"Notes on loading media" on page 33
U
A
Press the P button, and wait until Load media.
appears on the screen.
c
Important:
When spot color inks are installed, circulation
will be performed automatically to prevent
ink accumulating in the printer and causing
clogs when the printer is not in use. Because
turning the printer off prevents automatic
circulation from being performed, leading to
printer malfunction, we recommend that the
printer not be turned off.
Basic Operations
B
Open the front cover, and move the media
holding plates out of the way.
c
Sliding media holding plates
Move the media holding plates to the right and
left sides of the platen. Hold both tabs on the
media holding plates to move them.
Insertable media holding plates
Remove the media holding plates from both
edges of the media.
44
Important:
If the media holding plates are not moved out
of the way, media insertion may fail or
damage may occur to the edge of the media.