Snmp User Read - Fujitsu XG0224 User Manual

XG Series User's Guide

5.15.1.23 snmp user read

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Sets MIB read permission view.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
snmp user [<number>] read <access> [<view_number>]
<number>
• User ID
User ID expressed as a base 10 value from 0 to 7. Default is 0.
<access>
Sets MIB read permission view.
• all
Read permission is granted on all supported MIBs.
• none
MIB read permission is not granted.
• view
Use the MIB view information set with the
<view_number>
Specifies the "snmp view subtree"
10 value from 0 to 7. The view ID can only be set when view is specified for the <access>
option.
Configuration mode (admin class)
Sets MIB read permission view in SNMPv3.
If a "snmp view subtree" command definition corresponding to the view ID set does not
exist, MIB read permission is not granted.
If unset, read permission is granted on all supported MIBs.
snmp user <number> read all
"snmp view subtree"
command's MIB view ID number, expressed as a base
281
Chapter 5 Command Reference
command.
Device Information Settings