Lan Ip6 Filter - Fujitsu XG0224 User Manual

XG Series User's Guide
5.5.2.6

lan ip6 filter

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Set IPv6 filter
XG0224 / XG0448 / XG0440DC / XG0440DCR
lan [<number>] ip6 filter <count> <action> acl <acl_count>
<number>
• lan definition number
Specify lan definition number with a decimal number
<count>
• filtering definition number
Set the filtering priority with a decimal value
A smaller value has a higher priority.
Range
0 to 511 XG0224 / XG0448 / XG0440DC / XG0440DCR
<action>
• pass
Pass the packets which match
• reject
Discard the packets which match
<acl_count>
• ACL definition number
Specify ACL definition number with a decimal value.
- ip
If ip value is not configured, that filter definition is ignored
- tcp
This is enabled when ip6 <protocol> value is 6
- udp
This is enabled when ip6 <protocol> value is 17
- icmp
This is enabled when ip6 <protocol> value is 58
Configuration mode (admin class)
Set IPv6 filter for LAN interface
Note 1.
If none of "acl ip6" definition exist on the access control list which has been specified by
<acl> or if the access control list specified by <acl> does not exist, the packets are not
filtered.
Note 2.
The packet filtering default value is "pass".
No packets are filtered if only "pass" is set in <action>.
206
Chapter 5 Command Reference
Model
LAN Information Settings