Serverinfo Http Filter Move; Serverinfo Http Filter Default - Fujitsu XG0224 User Manual

XG Series User's Guide

5.15.8.28 serverinfo http filter move

Function
Available Model
Syntax
Options
Use Mode
Explanation

5.15.8.29 serverinfo http filter default

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Change the priority of the application filter for the HTTP server function
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
serverinfo http filter move <count> <new_count>
<count>
• Filering definition number
Specify a filtering definition number of which the priority is to be changed
<new_count>
• Destination filtering definition number
Specify a new priority for <count> with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Configuration mode (admin class)
Change the priority of the application filter for the HTTP server function
Set the default action of the application filter for the HTTP server function
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
serverinfo http filter default <action>
<action>
Specify how to handle a packet that did not match any application filter table for
the HTTP server function.
• accept
Accept the packets
• reject
Reject the packets
Configuration mode (admin class)
Specify how to handle a packet that did not match any application filter table for the HTTP
server function.
A packet that did not match any application filter table is transmitted.
serverinfo http filter default accept
322
Chapter 5 Command Reference
Device Information Settings