Loopdetect Interval; Loopdetect Recovery - Fujitsu XG0224 User Manual

XG Series User's Guide

5.11.1.4 loopdetect interval

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default

5.11.1.5 loopdetect recovery

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set a transmission interval of the Loop Detection frame.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
loopdetect interval <time>
<time>
• Transmission interval
Specify a transmission interval of the loop detection frame with a value from 1 to 32767
seconds.
The unit shall be h (hour), m (minute), or s (second).
Configuration mode (admin class)
Specify a transmission interval of the Loop Detection frame.
It is assumed that 10 seconds have been specified.
loopdetect interval 10s
Set the upper limit of monitoring counter for blocking port recovery.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
loopdetect recovery <count>
<count>
• Upper limit of monitoring counter for blocking port recovery, with a decimal value from 1
to 65535.
If the counter is expired without detecting the Loop, the blocking port is set non-
blocking again.
Configuration mode (admin class)
Set the upper limit of monitoring counter for blocking port recovery.
If the counter is expired without detecting the Loop, the blocking port is set non-blocking
again.
If the the Loop is detected, the counter is set 0 agein.
The monitoring interval is specified by "loopdetect interval"command.
It is assumed 60 has been specified as the upper limit of monitoring counter.
loopdetect recovery 60
237
Chapter 5 Command Reference
Loop Detection Information Settings