Serverinfo Sntp Filter Move; Serverinfo Sntp Filter Default - Fujitsu XG0224 User Manual

XG Series User's Guide

5.15.8.38 serverinfo sntp filter move

Function
Available Model
Syntax
Options
Use Mode
Explanation

5.15.8.39 serverinfo sntp filter default

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Change the priority of the application filter for the SNTP server function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
serverinfo sntp filter move <count> <new_count>
<count>
• Target filtering definition number
Specify a filtering definition number of which the priority is to be changed.
<new_count>
• Destination filtering definition number
Specify a new priority for <count> with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Configuration mode (admin class)
Change the priority of the application filter for the SNTP server function.
Set the default operation of the application filter for the SNTP server function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
serverinfo sntp filter default <action>
<action>
Specify how to handle a packet that did not match any application filter table for the SNTP
server function.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
Configuration mode (admin class)
Set how to handle a packet that did not match any application filter table for the SNTP
server function.
A packet that did not match any application filter table is transmitted.
serverinfo sntp filter default accept
328
Chapter 5 Command Reference
Device Information Settings