Nettime (Time/Sntp) Server And Client Statistics Display And Clear Operation Commands; Nettime (Time/Sntp) Statistics Display Commands; Show Nettime Status - Fujitsu XG0224 User Manual

XG Series User's Guide
5.36 NETTIME (time/sntp) Server and Client
Statistics Display and Clear Operation
Commands
This section explains about commands related to NETTIME statistics information.
5.36.1

NETTIME (time/sntp) Statistics Display Commands

This section explains commands related to NETTIME (time/sntp) statistics information display.

5.36.1.1 show nettime status

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Execution Example
Display the status with the NETTIME (time/sntp) function.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
show nettime status
N/A
Operation mode (user class/admin class)
Configuration mode (admin class)
Display the NETTIME (time/sntp) status.
Use of the "rdate" command is not reflected in the display of
NETTIME (time/sntp) status.
# show nettime status
Server Status Server Address
(1) (2)
Active 172.16.0.1
1) status of the time information server
Active : The switch clock has been automatically synchronized.
Inactive : The switch clock has not been automatically synchronized.
2) IP address of the time information server
The IP address of the time information server is displayed.
When Server Status is Inactive, "-" is displayed.
3) Time protocol
TIME TCP : TIME protocol
TIME TCP6 : TIME protocol (IPv6)
SNTP UDP : simple NTP protocol
SNTP UDP6 : simple NTP protocol (IPv6)
When Server Status is Inactive, "-" is displayed.
4) Last update time
The time recorded when the swtich clock was last synchronized.
Protocol
(3)
SNTP UDP
525
NETTIME (time/sntp) Server and Client Statistics Display and Clear
Chapter 5 Command Reference
Last Update Time
(4)
Wed Jan 5 14:51:45 2011
Operation Commands