Oob Ip6 Address; Oob Ip6 Ra Mode - Fujitsu XG0224 User Manual

XG Series User's Guide
5.5.6.3

oob ip6 address

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
5.5.6.4

oob ip6 ra mode

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set IPv6 address
XG2600
oob ip6 address [<count>] <address>/<prefixlen>
<count>
• IPv6 address definition number
Specify IPv6 address definition number with a decimal value from 0 to 3.
<address>/<prefixlen>
• IPv6 address/prefix length
Specify IPv6 address and prefix length. Link local address can not be specified.
Specify 64 for prefix length.
• auto
Address is automatically set with prefix of received RA (Router Advertisement)
message.
"lan ip6 ra mode recv" need to be set
Configuration mode (admin class)
Set IPv6 address for this interface
It is assumed that IPv6 function use only IPv6 link-local addresses.
Set RA (Router Advertisement) message mode
XG2600
oob ip6 ra mode <mode>
<mode>
• off
Disable RA message send/receive function
• recv
Enable RA message receive function
Configuration mode (admin class)
Set RA message function mode
• RA message receive function
When it is enabled, ND (Neighbor Discovery) parameter, default route, global address
are configured automatically based on RA message
It is assumed that RA message send/receive function is disabled.
lan <number> ip6 ra mode off
217
Chapter 5 Command Reference
LAN Information Settings