XG Series User's Guide
Organization and Usage of This Manual
This section describes target readers, contents, notations, etc. of this guide.
Target Readers and Required Knowledge
This guide was written for administrators, who are in charge of network construction, maintenance, and management.
To use this guide, the following knowledge is required.
•
Basic knowledge of networks, the Internet, and intranets
•
Basic knowledge of system security
This guide omits explanations of network protocol terms.
Areas Covered
This guide to the XGseries is composed of the following chapters.
Chapter Titles
Chapter 1 Features and Functions
Chapter 2 Using the CLI
Chapter 3 Installation
Chapter 4 Switch Functions and their
Configuration
Chapter 5 Command Reference
Chapter 6 Managing the Device
Chapter 7 Troubleshooting
Appendix A SNMP Traps
Appendix B List of MIBs
About the Symbols
The symbols used in this guide have the following meanings.
Precautions
Reference
Available Model
Warning
Caution
Describes the features and functions.
Describes operating environment of CLI and how to operate CLI.
Describes the necessary installation procedures.
Describes how to use the console screen.
Describes how to use the commands.
Describes the management of the device.
Describes how to solve problems in the device.
Describes message format of SNMP traps.
Describes the list of MIBs supported by the SNMP agent
Hint
Indicates useful information for using this device.
Indicates precautions that must be taken when using this device.
Indicates additional information to complement operating instructions.
Note
Indicates related matters such as operation procedures, etc.
Indicates the available model name when using functions of this device.
Indicates warning matters related to the Product Liability (P.L.) Law. Please follow them
when using this device.
Indicates cautionary notes related to the Product Liability (P.L.) Law. Please follow them
when using this device.
Contents
16